Assign
Schedule a task to be performed against a device.
WORK
You ASSIGN WORK to run one or more actions or match a specific rule against a device. So, for example, this is how you grab a device's state:
$ vaxctl assign work -d test_dev -a screenshot
$ vaxctl get work
ID STATE ID DEVICE TRIGGER ASSIGNED AT STATUS
1 0 test_dev Manual - Actions: screenshot 2022-03-09T12:23:12.202126 PENDING
And this is how you'd run a couple of actions against the device:
$ vaxctl assign work -d test_dev -a 'power status','ipmi lan print'
$ vaxctl get work -v
WORK ID STATE ID ACTION TRIGGER STATUS COMPLETED AT RUN DATA
3 0 power status Manual - Actions: power status, ipmi lan print success 2022-03-09T12:26:36.356948 stdout = Chassis Power is
on
3 0 ipmi lan print Manual - Actions: power status, ipmi lan print success 2022-03-09T12:26:39.098181 stdout = Set in Progress : Set Complete
Auth Type Support : MD5
Auth Type Enable : Callback : MD5
: User : MD5
: Operator : MD5
: Admin : MD5
: OEM :
IP Address Source : DHCP Address
IP Address : 10.1.1.2
Subnet Mask : 255.255.255.0
MAC Address : ff:ff:ff:ff:ff:ff
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Gratituous ARP Intrvl : 2.0 seconds
Default Gateway IP : 10.1.1.1
Default Gateway MAC : 00:00:00:00:00:00
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
RMCP+ Cipher Suites : 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
Cipher Suite Priv Max : XXXaXXXXXXXXXXX
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM
Bad Password Threshold : Not Availabl